• 6 x Shell-pac graphic panels
• 2 x Lit roller 4 stands 
• 1 x Roll-plinth
• Fits a 3 x 3 Shell Scheme

N.B. Shell schemes come in variety of sizes, check with the Exhibition Organiser to confirm the size of your shell scheme before placing an order.

---

Shell-pac is an environmentally friendly way to exhibit and revolutionises the way in which a shell scheme can be dressed. Using latest technology, graphics are printed direct onto lightweight honeycomb panels which are then attached directly to the shell scheme walls. Panels have a seamless crease in the centre allowing them to be easily transported whilst giving an unbroken image.

Shell-pac is supplied in reinforced cardboard carry boxes. Three graphic panels fit into each box. This enables the panels to be used a number of times and also means that the entire system, including the carry box, can be recycled.

As the system is 100% recyclable Clip can dispose of it free of charge if you send the panels back. Not only that, Clip can deliver the system directly to the stand and install it for you* making this a simple, cost effective and stress free way of dressing your shell scheme. 

If you require a larger stand size individual panels can be purchsed from the drop down menu or take a look at our bigger Shell-pac Kit 4!

*Show dependent


View video demo below:

Technical Specification:

Sodem (Panel Sizes)

• Artwork @ 25% 236.5mm x 585mm
• Full size 946mm x 2340mm

Octanorm (Panel Sizes)

• Artwork @ 25% 237.5mm x 585mm
• Full size 950mm x 2340mm

Modul Classic (Panel Sizes)

• Artwork @ 25% 236.25mm x 600mm
• Full size 945mm x 2400mm

Please contact Clip for sizes of all other Shell-pac items.

Artwork Requirements:

• Artwork must be set up at 25% with 3mm bleed
• (to the overall outside edge) and in CMYK
• Images must not exceed 100% in size
• @300dpi resolution
• Guidelines must not be within the artwork
• as these will print
• Colour profiles should not be embedded
• Overprint fill must be turned OFF in all cases
• All transparencies should be flattened
• The finished graphic should be saved out as a single spread (not as separate pages).

Exporting Your PDF's

Quark

• Export layout as PDF
• Settings - Bleed: Symmetric 3mm
• Resolution: 300dpi

Acrobat Distiller

• Settings - Adobe PDF preset: [Press Quality]

Indesign / Illustrator

• Export as PDF
• Settings - Bleed: 3mm
• - Adobe PDF preset: [Press Quality]